Pressing Quartz Slab - Professional Quartz Stone Countertops and Slabs Manufacturer

Quartz Slab, Slab pressing is used to press the distributed material through vacuuming, low-medium-high frequency jolt-squeeze and air-exhaustion under the control of AI programming.

Experience is also very important for Quartz Stone Factory
Too much things should be considered, please pardon for only mention the follow

-Adopt the best resin in at present.
-Checking proportion accurately for quartz surface needs.
-Checking temperature instantly and setting time to make sure quartz stone cooked well.
-Make sure color design could be strictly complied with quartz surface design.
-Cleaning working table and flooring after every lamination slab production.

The pressed sheets are sent to the curing oven, where the programmable temperature by difference control technology is adopted to heat the upper and lower splints at the same time, so that the slabs can be uniformly heated and cured.The cured slabs are sent to the polished line through a 50 meter horizontal cooling transfer line.During the process of transfer, the slabs are always kept straight and even. At the specific unloading position, the temperature of the slabs will be dropped from 90℃ to lower than 40℃, and then horizontal placed on the plated racks to cool down for more than 24 hours before polishing.